send link to app

OptCam


4.0 ( 3920 ratings )
Foto und Video
Entwickler Masato Hazama
0.99 USD

OptCam is a camera for taking the photograph of high resolution, and a photograph with few noises with cameras with low resolution, front cameras, etc., such as iPod touch /iPad.
Furthermore, it can adjust brightness, tone, and acute in real time.

Photography mode has five kinds, Normal, 1 Shot, 4 Shots, NR Shots, and ADDShots.
At present, the real-time preview by photography mode cannot be performed, and is reflected only in a processing result.

The outline in photography mode is as follows.
1. The Normal is the usual photography.
2. The 1Shot is photoed and is extended to 4 times the size of horizontal x2 and vertical x2 by interpolation processing. Processing time starts a little for interpolation processing.
3. The 4Shots is taken the photograph 4 times, and enhanced to 4 times the size of horizontal x2 and vertical x2 by synthetic processing. In order to compound the photograph which carried out the seriography, when camera shake and a photographic subject move, image quality deteriorates.
4. The NR Shots taken the photograph 4 times, synthesized, and the noise is decreased. In order to compound the photograph which carried out the seriography, when camera shake and a photographic subject move, image quality deteriorates.
5. The ADDShots taken the photograph 2 times, and make it bright by a compositing process.
This mode is for photoing a dark place. It will become unnatural if it uses for photography of a picture bright from the first.

Photography size can be set up as a maximum of 7 it is Low, Medium, High, 352x288, 640x480, 1280x720, and 1920x1080.
The resolution which can respond changes with devices in use.
For example, in fourth generation iPod Touch, it is as follows.
 Low: 192x144
 Medium: 480x360
 High: 1920x1080 (rearCamera) 、 1280x720 (frontCamera)
 352x288: 352x288
 640x480: 640x480
 1280x720: 1280x720
 1920x1080: 1920x1080 (rearCamera)
Moreover, insufficient memory may arise depending on photography mode and resolution.
Processing becomes heavy, so that it is high-resolution.
When it cannot respond, a warning dialog is displayed and it is changed into Low resolution.

Usage is very easy.
If it starts, a photography screen will appear.
With the button of the screen upper part, selection of photography mode, picture resolution, and a Front/Rear camera is made.
Moreover, when a Rear camera is chosen, it is the Torch button and a flashlight emits light.
Brighter, Vivid, and Enhancer of a screen lower part, are chosen, a slider is adjusted, and it is made a favorite picture.
If a shutter release is touched, a photography picture is processed and a processed photograph is saved to a camera roll.
After preservation processing finishes, it returns to a preview screen again.